Installing the Base on a Wall
■
Unit must be unplugged before Installing
■
See “Parts List” and “Base Connectors” earlier in this
booklet for additional picture detail
Plug the power cord/AC
adapter into the power cord
jack on the underside of the base.
Route the power cord through its
channel and out the front end of the
phone (as shown).
Attach the mounting stand to
the base of the phone as
follows: Gently place the phone
upside down with the low end of
the phone to the right. Insert the
tab on the narrow end of the stand
into the left slot on the base of the
phone. Then insert the other tab
into the right slot, pushing the stand
down and slightly inward until the
tab locks into place.
Power Cord
13
