Lucent Technologies Lineage
®
2000 100A Ferroresonant Rectifier J85503A-1
Issue 6 October 1998
Product Description 2 - 13
Physical,
Thermal, and
Electrical
Specifications
Table 2-B, Table 2-C, and Table 2-D give the physical, thermal,
and electrical specifications for the Lineage
®
2000
J85503A-1, 100-ampere rectifier. Regulation on battery is 0.5%
for the line, load, frequency, and temperature specifications.
Regulation off battery is 2% for these specifications.
Figure 2-6: Signal Flow between Rectifier and Lucent Technologies Controller
DC Output Circuit Breaker Status (CB)
Rectifier
Control
Board
CM2
Power Switch Status (MAN)
Rectifier Shutdown (TR)
Rectifier Current Capacity (TP)
Rectifier Failure Alarm (RFA)
Rectifier Restart (RS)
Rectifier Current Drain (VI)
Rectifier Efficiency Algorithm (TRH)
Phase Failure Alarm (PHA)
* Plant Control Cable Assembly is manufactured by
Lucent Technologies and must be ordered separately.
See Lineage 2000 Battery Plant documentation for details.
®
Remote Regulation (R+,R–)
To Plant Controller
Plant Control
Cable Assembly *
Table 2-B: Physical and Thermal Specifications of the
J85503A-1 Rectifier
Output DC
±24V
Output DC
–48V
Dimensions
(inches)
23.25 wide x 24 tall x 12 deep
Weight (lbs)
300
350
Heat Dissipation*
BTU/hr at full load
1300
2050
Humidity Rating
10 to 95% (non-condensing)
Operating Altitude
Sea level to 10,000 feet (3048 meters)
Operating
Temperature
35 - 122°F
1.5 - 48.8°C
* Measured at 28 Vdc for 24-volt rectifiers and at 54 Vdc for
48-volt rectifiers.