Basic safety aspects
.................................................................................................................................................................................................................................
General safety requirements
In order to keep the technically unavoidable residual risk to a minimum, it is
imperative to observe the following rules:
•
Transport, storage and operation of the system must be under the
permissible
conditions only
.
See accompanying documentation and information on the system.
•
Installation, configuration and disassembly must be carried out only by
expert
personnel
and
with reference to the respective documentation
.
Due to the complexity of the system, the personnel requires
special training
.
•
The system must be operated by
expert and authorized users only
.
The user must operate the system only after having
read and understood
this
chapter on safety and the parts of the documentation relevant to operation. For
complex systems, additional training is recommended. Any obligatory training for
operating and service personnel must be carried out and documented.
•
The system must not be operated unless it is in perfect working order.
Any faults and errors that might affect safety must be reported
immediately
by the
user to a person in responsibility.
•
The system must be operated only with the connections and under the
environmental conditions as described in the documentation.
•
Any conversions or changes to the system or parts of the system (including the
software) must be carried out by qualified Lucent Technologies personnel or by
expert personnel authorized by Lucent Technologies.
All changes carried out by other persons lead to a
complete exemption from
liability
.
No components/spare parts must be used other than those recommended by the
manufacturer and those listed in the procurement documents.
•
The removal or disabling of safety facilities, the clearing of faults and errors, and
the maintenance of the equipment must be carried out by
specially qualified
personnel only
.
The respective parts of the documentation must be strictly observed. The
documentation must also be consulted during the selection of measuring and test
equipment.
•
Calibrations, special tests after repairs and regular safety checks must be carried
out, documented and archived.
•
Non-system software is used at one’s
own risk
. The use/installation of non-system
software can adversely affect the normal functioning of the system.
•
Only use
tested and virus-free
data carriers (floppy disks, streamer tapes,
{
).
Safety
.................................................................................................................................................................................................................................
365-374-187
Issue 1, December 2005
Lucent Technologies - Proprietary
See notice on first page
1-7