Lucent Technologies Integrated Solution II System Manager'S Manual Download Page 33

Page: 33 / 177

Getting Started

The

Confirm Time and Date

screen appears to confirm the settings

you selected.

Confirm Time and Date

The date is July 6, 1991, time is 03:42 PM

You MUST exit Integrated Solution II for any change to take
effect.

CONT

CANCEL

Screen 3-6. Confirm Time and Date Screen

Press

[F3]

(CONT) to confirm the settings and return to the User

Maintenance menu.

Press

[F6]

(CANCEL) to return to the IS-II Main Menu.

10.

Exit from the IS-II Main Menu; then log in again for your changes to

take effect.

11.

Refer to Chapter 4, and follow the procedure to synchronize the time and date
setting with the MERLIN LEGEND Communications System.

3-7

Summary of Contents for Integrated Solution II


















































































































































































Search results

Summary of Contents for Integrated Solution II

Reviews:

Brands by name

Popular brands

Lucent Technologies Integrated Solution II, System Manager'S Manual

Search results

Summary of Contents for Integrated Solution II

Reviews:

Brands by name

Popular brands