Lucent Technologies DDM-2000 OC-3, User & Service Manual

Page: 833 / 2536

RLS-LPBK-T1 2 of 1 Page RLS-LPBK-T1
NAME
Release-Loopback-T1 rls-lpbk-t1:
FORMAT INPUT
rls-lpbk-t1: Address
[:
lpbktype= LoopbackType
];
DESCRIPTION
an or port DS1 a on loopback established previously a releases command This
and 13.0 Release OC-3 in pack circuit TMUX BBG20 a in port DS1 "internal"
allowed is address same the on loopbacks of types both establishing Since later.
type the include to enhanced been has command this pack, circuit TMUX the for
only the interfaces, LAN IMA the using When released. be to loopback of
is type loopback allowed terminal.
are: parameters input The
Address
released. be to is loopback a where port(s) DS1 of Address
are: addresses valid loopback, terminal a For
{a,b,c}-{1-7}-{1-4,all} {a,b,c}-all, all,
are: addresses valid Loopback, facility a For
{a,b,c}-{1-7}-{all} {a,b,c}-all, all,
valid later and R13.0 in BBF3B the on loopback facility a For
are: addresses
{a,b,c}-{1-7}-{1-4,all} {a,b,c}-all, all,
than other packs DS1 on ports DS1 for lookback facility a For
are: addresses valid BBF3B,
{a,b,c}-{1-7}-all {a,b,c}-all, all,
valid later, 13.0 Release OC-13 in pack TMUX BBG20 the For
are: addresses
{a,b,c}-{1-7}-{1-4,all} {a,b,c}-all, all,
two supports 15.0) Release (OC-3 pack circuit (BBF6) T1EXT The
1 number ports only BBF6, a on ports addressing When ports. T1
Specifying valid. are 2 and
all
only. 2 and 1 ports selects
lpbktype
facility. or terminal is loopback the whether specifies Loopbacktype
pack circuit TMUX BBG20 the to applicable only is parameter This
type one only Since releases. later and R13.0 OC-3 DDM-2000 in
packs, circuit T1EXT or DS1 on time a at allowed is loopback of
packs. circuit these for used not is parameter this
OC-3 DDM-2000
2000 February 2 Issue
11-163