Lucent Technologies DDM-2000 OC-3, User & Service Manual

Page: 2133 / 2536

363-206-285 Detailed Level Procedure:
DLP-513
Issue 2, February 2000 Page 1 of 20
DDM-2000 OC-3 M
ULTIPLEXER
Set Circuit Pack Options
1. NOTE:
When a replacement circuit pack (except the SYSCTL) is configured the
same as the original circuit pack, it may be inserted with no further action.
When a replacement circuit pack is different (different code or different
switch options) from the original, the SYSCTL UPD/INIT button must be
momentarily depressed (or use the
upd
command) to update the
inventory.
Find the circuit pack in Table A and go to the indicated step. If you were sent
here from another procedure, return to that procedure after setting options.
*There are no option switches on these circuit packs.
Table A – Circuit Packs
Circuit Pack Step
BBG8/BBG8B SYSCTL Step 2
BBG9 OHCTL* —
BBF2 TGS Step 7
BBF2B/BBF2C TGS Step 11
BBF4 TG3 Step 11
BBF5 JMPR* —
22D-U OLIU* —
22F/22F-U/22F2-U OLIU* —
22G-U/22G2-U/22G3-U/22G4-U OLIU* —
26G2-U/27G-U/27G2-U OLIU* —
24G-U/24H-U OLIU* —
29G-U/29H-U OLIU* —
BBG2/BBG2B MXRVO* —
BBG4/BBG4B/BBG19 DS3 Step 16
BBG20 TMUX Step 16
BBF1/BBF1B DS1 Step 19
BBF3/BBF3B DS1PM Step 19
BBG6 STS1E Step 23
BBF8 HDSL Step 28
BBF6 T1EXT Step 31
BBF9/BBF10 LAN Step 34
177A Retainer Card* —