DACS II/Rel 8.2.6
April 2000
2-17
DACS II/Rel 8.2.6
MML
RTRV,STATE,EQPT,NPC,LPBK
53131
UTILITY QUERY LOOPBACK
MML
53131
RTRV,STATE,EQPT,NPC,LPBK
Explanation of
Command
1.544 Mbit/s Termination
This command requests a report indicating which Network Processing Circuits are
in the loopback state. The message applies to DA and TA type NPCs or to TE and
TH type NPCs on Hybrid DS3Us. If the first NPC in a range of NPCs is a DA or TA
type NPC, then only DA and TA type NPCs are reported on. If the first NPC in a
range of NPCs is a TE or TH type NPC on a Hybrid DS3U, then only Hybrid DS3U
NPC types are reported on.
For DA and TA type NPCs, loopbacks being executed by far-end equipment as
well as loopbacks being executed by DACS II are reported.
For TE and TH type NPCs on Hybrid DS3Us, local and remote line loopbacks are
the only type of loopbacks that are supported.
2.048 Mbit
⁄
s Termination
This command requests a report indicating which Network Processing Circuits are
in the loopback state. The message applies to PA, PB, and PC type NPCs. If other
NPC types are encountered in a range of NPCs, these other NPC types will be
skipped.
Command Nonhierarchical
[I.53131]
RTRV-STATE-EQPT:[<xy>]:NPC-[s]abc[&&-[t]def]:[ww]:LPBK;
Hierarchical
[I.53131]
RTRV-STATE-EQPT:[<xy>]:NPC-uv-m-np[&&&-wx-k-qr]:[ww]:LPBK;
