manualshive.com logo in svg

Lucent Technologies DACS II, Features Manual

Share
Download
Lucent Technologies DACS II Features Manual Download Page 14

1-8

Issue 2.0

April 2000

365-353-255

DACS II Operation and Maintenance Manual

Release 8.2.6 Features

RAI Alarm Suppression Feature

Overview

The Remote Alarm Indicator (RAI) Alarm Suppression feature provides a way of 
suppressing the individual DS1/E1 tributary alarms when a DS3 “Yellow Alarm” is 
detected by the DS3 HMXR card. These individual alarm messages add no new 
information and quite frequently overload the system with redundant messages. 
A DS3 failure message is typically sufficient.

With this added functionality, the HMXR suppresses individual DS1/E1 alarm 
messages when any of the following DS3 failures are detected:

■

Loss of Signal (LOS)

■

Loss of Frame (LOF)

■

Excessive Bit Error Rate (BER)

■

Alarm Indication Signal (AIS or IDLE)

■

RAI.

Alarm 
Suppression 
Operation

When a DS3 failure is detected, the HDS3U will issue the alarm message and an 
subsequent idle message for the DS3 itself. DS1/E1 messages (PBA, CGA, and 
performance monitoring threshold messages) created as a result of the DS3 
failure are always suppressed. 

DS1/E1 messages will be issued if a DS1/E1 remains in alarm after the DS3 is 
idled and was not in alarm previous to the DS3 going in alarm. In this case, the 
DS1/E1 failure most likely is a result of something other than the DS3.

Summary of Contents for DACS II































































Reviews:

No comments

Brands by name

Popular brands

Load more brands