manualshive.com logo in svg

Lucent Technologies CentreVu, User Manual

The Lucent Technologies CentreVu User Manual is a comprehensive guide that provides detailed instructions on installing, configuring, and operating the product. Easily downloadable for free from manualshive.com, this manual is essential for users seeking a comprehensive understanding of the CentreVu and its functionalities.

Share
Download
background image

 

 

Defining the Data for a Custom Report 

CentreVu CMS Custom Reports

Defining Report Fields

4-21

Step 3: Define 
the Table(s) for 
Calculation 
Names

4

Enter a table name in the

 Table for calculations 

field only if you 

entered a calculation name in the

 Select 

field. The table name tells 

CentreVu CMS in what table to look for the database items in the calculation.

For example, look at the following entries:

Select: AVG_POS_STAFF

Table for calculation: hsplit

These entries mean “Take the calculation defined in the Dictionary 
subsystem for <AVG_POS_STAFF>, which is

 

I_STAFFTIME/(INTERVAL*60)

, and apply the

 hsplit 

table name to the 

database items.” In effect, the two fields make the calculation

 

hsplit.I_STAFFTIME/(hsplit.INTERVAL*60)

.

Step 4: Justify 
Data in the 
Field

4

Select, from the

 Justification 

list, the way you want 

CentreVu CMS to 

line up data when the data appear in the field. Normally, numerical data is 
right-justified so that the right hand side lines up in a column. Names are 
normally left-justified so that the first character of each name is lined up. 
However, you may choose any of the three options for any type of data.

Note

The

 Table for calculations 

field is necessary because you 

cannot append a table name to a calculation name in the

 Select 

field.

Summary of Contents for CentreVu







































































































































































































Reviews:

No comments

Related manuals for CentreVu

EAW Resolution Introduction Manual preview
Resolution
Brand: EAW Pages: 36
FARONICS ANTI-EXECUTABLE ENTERPRISE Manual preview
ANTI-EXECUTABLE ENTERPRISE
Brand: FARONICS Pages: 68
Novell DATA SYNCHRONIZER - UPDATE 1 Installation Manual preview
DATA SYNCHRONIZER - UPDATE 1
Brand: Novell Pages: 9
Bosch VIDOS Installation And Operating Manual preview
VIDOS
Brand: Bosch Pages: 40
Bosch Divar Archive Player Operation Manual preview
Divar Archive Player
Brand: Bosch Pages: 10
Bosch MBV-BPRO-40 Operator'S Manual preview
MBV-BPRO-40
Brand: Bosch Pages: 86
Bosch DINION IP 5000 MP Software Manual preview
DINION IP 5000 MP
Brand: Bosch Pages: 112
Red Hat CLUSTER SUITE 4.7 DM MULTIPATH Configuration And Administration Manual preview
CLUSTER SUITE 4.7 DM MULTIPATH
Brand: Red Hat Pages: 38
Intel IT DIRECTOR Manual preview
IT DIRECTOR
Brand: Intel Pages: 43
Quantum Scalar 1000 Reference Manual preview
Scalar 1000
Brand: Quantum Pages: 304
Garmin 010-10844-00 - Mobile XT - GPS Software Quick Start Manual preview
010-10844-00 - Mobile XT - GPS Software
Brand: Garmin Pages: 8
Canon VIXIA HF M30 Instruction Manual preview
VIXIA HF M30
Brand: Canon Pages: 60
Harman Kardon SIG2.0 Instruction & Operation Manual preview
SIG2.0
Brand: Harman Kardon Pages: 19
Janome Digitizer MB Instruction Book preview
Digitizer MB
Brand: Janome Pages: 306
SanDisk MUSIC MATCH JUKEBOX 9.0 User Manual preview
MUSIC MATCH JUKEBOX 9.0
Brand: SanDisk Pages: 11
JVC ProHD Log User Manual preview
ProHD Log
Brand: JVC Pages: 9
JVC GY-DV300U - 1/3" 3-ccd Dv Camcorder Instruction Manual preview
GY-DV300U - 1/3" 3-ccd Dv Camcorder
Brand: JVC Pages: 108
Avaya NULL CCM3.1 User Manual preview
NULL CCM3.1
Brand: Avaya Pages: 14

Brands by name

Popular brands

Load more brands