Lucent Technologies CentreVu User Manual Download

Page: 71 / 198

Defining the Data for a Custom Report

CentreVu CMS Custom Reports

Defining Report Fields

4-13

Step 1: Define
the Position
and Length of
a Field

Figure 4-5: The Field Window

1a. On the Screen Painter, position

the cursor where you want a field
to begin, and select

Field

from

the action list.

→

The cursor returns to its
original position, and the
following message appears:

Move cursor to define

opposite corner of

field and press

RETURN.

1b. Move the cursor using the arrow

keys to define a field length, and
press

. Be sure the field is

long enough to contain the data.
If the field is too short for a value,
the report shows asterisks (

) in

the field or, if the data is a word,
cuts letters off.

→

The field appears as a
question mark (

) followed by

’s. The question mark

indicates that you have not yet
assigned a Row Search ID to
the field. The Field window
also appears.

Return

Summary of Contents for CentreVu







































































































































































































Search results

Summary of Contents for CentreVu

Reviews:

Related manuals for CentreVu

Brands by name

Popular brands

Lucent Technologies CentreVu, User Manual

Search results

Summary of Contents for CentreVu

Reviews:

Related manuals for CentreVu

Brands by name

Popular brands