manualshive.com logo in svg

Lucent Technologies CentreVu, User Manual

Share
Download
Lucent Technologies CentreVu User Manual Download Page 57

 

 

Using Screen Painter Editing Tools 

CentreVu CMS Custom Reports

Entering Report Text

3-13

Copying a 
Block

3

When you copy a block, the block’s text or fields cannot overlap any other 
text or fields. If you do try to copy a block to a location where it will overlap 
existing text or fields, an error message displays in the status line.

Entering Report Text

3

You can enter text on the Screen Painter to label your fields, enter a report 
title, or include special instructions for the report. You should normally enter 
text to label each data field so that when you run the report you will know 
what data the field is showing.

You should enter text before defining the data fields for two reasons:

●

The text provides a skeleton layout to help you position your data fields.

●

The text helps you remember what each data field represents. If you 
have to change fields, this text saves you time.

Note

Prior to completing a block copy, you can press

 

 to cancel the 

copy.

1. On the Screen Painter, place the 

cursor in a position where you 
want one corner of the block to 
be, and select

 Copy block

.

→

The cursor returns to its 
original position, and the 
following message appears on 
the status line:

 Move cursor 

to define opposite 

corner of block, press 

RETURN

.

2 Move the cursor to a position 

where you want the opposite 
corner of the block to be. The 
block should include all fields and 
text you want to copy.

→

The block you are defining 
becomes highlighted as you 
move the cursor.

3. Press .

→

The following message 
appears in the status line:

 

Move cursor to locate 

upper left corner of 

copy, press Return.

4. Move the cursor to a new 

position for the upper left corner 
of the block, and press 

.

→

All fields and text within the 
block are copied to the new 
location.

Ctrl

c

Return

Return

Summary of Contents for CentreVu







































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands