manualshive.com logo in svg

Lucent Technologies CentreVu, User Manual

The Lucent Technologies CentreVu User Manual is a comprehensive guide that provides detailed instructions on installing, configuring, and operating the product. Easily downloadable for free from manualshive.com, this manual is essential for users seeking a comprehensive understanding of the CentreVu and its functionalities.

Share
Download
background image

 

 

Advanced Report Design 

CentreVu CMS Custom Reports

Creating a Custom Data Table

6-2

To define custom data tables, use the steps described in the following pages.

Caution

If you back up data using the Maintenance — Backup Data window, 
the data stored in custom 

INFORMIX tables will be saved, but the 

custom table definitions (table names, column names, data 
types, and so on) will not be saved. As a result, if you lose the 
custom table definitions because of a disk crash, power hit, or 
some other reason, you cannot restore these table definitions using 
the Backup Data window. Because the custom table definitions will 
be lost, you will not be able to restore the custom data that was 
saved using the Backup Data window.

For this reason, it is recommended that you make your own 
backups of the custom table definitions using the 

UNIX

a

 

system/

Solaris

b

 system. If you lose 

INFORMIX table definitions 

and/or custom data, you can restore the table definitions using 
UNIX and then restore the custom data. See the “UNIX 
System/

Solaris System” chapter in the CentreVu

 

CMS 

Administration (585-215-820) document for procedures on backing 
up data via the 

UNIX system.

a.  UNIX is a registered trademark of Novell, Inc.
b.  Solaris is a registered trademark of Sun, Inc.

Summary of Contents for CentreVu







































































































































































































Reviews:

No comments

Related manuals for CentreVu

ASCOM TEMS VISUALIZATION 7.1 PROFESSIONAL Datasheet preview
TEMS VISUALIZATION 7.1 PROFESSIONAL
Brand: ASCOM Pages: 8
M-Audio GT Player Express Quick Start Manual preview
GT Player Express
Brand: M-Audio Pages: 4
KAPERSKY ANTI-VIRUS 5.5 - FOR NOVELL NETWARE Administrator'S Manual preview
ANTI-VIRUS 5.5 - FOR NOVELL NETWARE
Brand: KAPERSKY Pages: 134
Red Hat NETWORK BASIC - USER REFERENCE GUIDE 4.0 User Reference Manual preview
NETWORK BASIC - USER REFERENCE GUIDE 4.0
Brand: Red Hat Pages: 92
Waves MultiRack SoundGrid Troubleshooting Manual preview
MultiRack SoundGrid
Brand: Waves Pages: 39
Yellowtec b-line Manual preview
b-line
Brand: Yellowtec Pages: 124
Acer ASM 7 Faq preview
ASM 7
Brand: Acer Pages: 32
Acer Altos RAIDWatch Manual preview
Altos RAIDWatch
Brand: Acer Pages: 212
Ulead BURN.NOW 1.5 User Manual preview
BURN.NOW 1.5
Brand: Ulead Pages: 60
Red Hat CERTIFICATE 7.2 RELEASE NOTES Release Note preview
CERTIFICATE 7.2 RELEASE NOTES
Brand: Red Hat Pages: 24
Red Hat CLUSTER MANAGER - INSTALLATION AND Administration Manual preview
CLUSTER MANAGER - INSTALLATION AND
Brand: Red Hat Pages: 190
Draytek SmartMonitor User Manual preview
SmartMonitor
Brand: Draytek Pages: 60
Nikon Nikon View Software Manual preview
Nikon View
Brand: Nikon Pages: 12
Nikon Digital Cameras Reference Manual preview
Digital Cameras
Brand: Nikon Pages: 51
Zio Interactive Cassiopeia Pocket PC User Manual preview
Cassiopeia Pocket PC
Brand: Zio Interactive Pages: 17
Cabletron Systems CBU-NM User Manual preview
CBU-NM
Brand: Cabletron Systems Pages: 108
Cabletron Systems SSR-ATM29-02 User Manual preview
SSR-ATM29-02
Brand: Cabletron Systems Pages: 386
Mackie DIGITAL XBUS - SOFTWARE Installation Manual preview
DIGITAL XBUS - SOFTWARE
Brand: Mackie Pages: 8

Brands by name

Popular brands

Load more brands