Lucent Technologies CentreVu User Manual Download Page 129

Page: 129 / 198

Completing Your Custom Report

CentreVu CMS Custom Reports

Test Design Error Messages

5-11

Table 5-1: Phase 1 Error Messages (Contd)

Cause:

You cannot specify both aggregate columns and
nonaggregate columns in the same select for real-time
reports.

Solution:

Create two identical row search conditions and apply one to
the aggregate columns and one to the nonaggregate
columns.

Message:

Cannot use the SYN function for order by

Cause:

You cannot use a synonym to sort the output.

Solution:

Remove the SYN aggregate from the

Order by

field.

Message:

CMS system error - Check the error log

Cause:

CentreVu CMS system error occurred while the select

executed. The error should be recorded in the error log.

Solution:

Check the error in the error log to initiate corrective action.

Table 5-1: Phase 1 Error Messages —

Continued

Caution

If you run a report that merges data from two tables
(particularly tables with large amounts of data) into a
single field and your

Select rows where

statement is not specific enough, you may get this error
message. The specific cause may be that the number
of selected rows is very large, and

CentreVu CMS

does not have enough space to create temporary files.
If this is the case, you should add additional “where”
clauses to the row search criteria.

Message:

CMS system error - Data collection off

Cause:

CentreVu CMS cannot test the row search criteria while
data collection is off.

Solution:

Turn data collection on and rerun test of report design.

Message:

CMS system error - Too much data retrieved -

try a more restrictive search

Cause:

Too much data was retrieved with the given row search
criteria.

Solution:

Add more conditions to the row search criteria so that fewer
rows are retrieved.

Summary of Contents for CentreVu







































































































































































































Search results

Summary of Contents for CentreVu

Reviews:

Related manuals for CentreVu

Brands by name

Popular brands

Lucent Technologies CentreVu, User Manual

Search results

Summary of Contents for CentreVu

Reviews:

Related manuals for CentreVu

Brands by name

Popular brands