Lucent Technologies CentreVu User Manual Download

Page: 116 / 198

Defining the Data for a Custom Report

CentreVu CMS Custom Reports

Defining Fields to Show Run Time/Date and User Inputs

4-58

2a. Enter an

to select a display type. You must also complete the

associated field.

The display options are:

date

report

was run

Select this option to display the date you ran the report.
You must also specify a date format with appropriate
punctuation in the associated field. You can enter any of
the following formats or combination of formats:

Table 4-8: Date Formats

The numerical month.

MMM

The month represented by three letters.

The year as two digits.

yyyy

The year as four digits.

The numerical day of the month.

jjj

The day of the year in the Julian
calendar.

www

The day of the week as three letters.

An example of combined formats would be the standard
date format

mm/dd/yy

. Or, you could enter just the day

and month

mm/dd

time

report

was run

Select this option to display the time you ran the report.
You must also enter a time format with the appropriate
punctuation.

You can use any of the following formats:

Table 4-9: Time Formats

The hour only, in military time (24-hour
clock).

The hour only, according to a 12-hour
clock.

The number of minutes after the hour
only.

The number of seconds into the minute.

Summary of Contents for CentreVu







































































































































































































Search results

Summary of Contents for CentreVu

Reviews:

Related manuals for CentreVu

Brands by name

Popular brands

Lucent Technologies CentreVu, User Manual

Search results

Summary of Contents for CentreVu

Reviews:

Related manuals for CentreVu

Brands by name

Popular brands