Lucent Technologies CentreVu Supervisor, Installation And Getting Started Manual

Page: 52 / 306

CentreVu Supervisor Version 8 Installation and Getting Started
Installing CentreVu Supervisor on a Shared Network Drive
Installation Procedures
3-2
Installation Procedures
3
Installing CentreVu Supervisor to a shared application folder is a two-step
process that consists of the following:
●
Performing the network setup
●
Performing a client setup at each client PC.
The network setup expands all program files and all language options into the
network directory. In addition, this setup transfers a client setup program and its
associated files to the network directory. You can do this setup from either the
network installation folder or from a CD-ROM.
The client setup program allows clients to access Supervisor from the network
server. Client setup creates a folder on the client PC. The icons in the folder
point to the executable files on the application server. In addition, client setup
allows you to identify where you want to put the user-specific files (these files
can be located on the client’s local drive or on the network).
NOTE:
For installation requirements, see “Other Requirements” on page 1-11.
Network Setup
3
To perform a network setup, you must have administrative privileges on a
workstation that is running Windows. Then do the following:
1. Log on to the PC as a user with administrative privileges.
2. Before starting the installation, close all running programs on the PC.
3. Create a folder on the network drive to hold the Supervisor application
files, and make it read-only and shared.
4. Verify that the network drive containing the application folder is connected
to each client PC.
5. On the Supervisor distribution medium (CD-ROM or installation folder),
locate and double-click on the
Readme.txt file to view last minute
installation tips on CentreVu Supervisor.