Lucent Technologies CentreVu Supervisor, Installation And Getting Started Manual

Page: 37 / 306

CentreVu Supervisor Version 8 Installation and Getting Started
Installing CentreVu Supervisor on a Local PC
Installation Procedures
2-3
6. Verify that the network drive where you copied the contents of the
distribution medium is available to each PC that will be installing
Supervisor from the network.
7. Go to “Setting Up the PC” below.
Setting Up the PC
2
1. Before starting the installation, close all running programs on the PC.
2. On the Supervisor distribution medium (CD-ROM or installation folder),
locate and double-click on the
Readme.txt
file to view last minute
installation tips on CentreVu Supervisor.
The file will be displayed in Windows Notepad, as shown below:
3. To exit the readme file, close the Notepad application.
4. To begin the installation, select the appropriate following step:
a. If installing from CD-ROM and AutoPlay is enabled, insert the CD
go to Step 10 .