Lucent Technologies CentreVu Supervisor, Installation And Getting Started Manual

Page: 236 / 306

CentreVu Supervisor Version 8 Installation and Getting Started
Installing and Using CentreVu Terminal Emulator
Using Terminal
8-12
Edit Menu
8
From this menu you can copy selected text to the Microsoft Windows
Clipboard, paste the contents of the Clipboard to a remote host computer,
and clear the contents of the Clipboard. In this case, “pasting” means
sending the selected text to the screen as if it were typed by the user. The
capability to cut text is not supported by Terminal. The following table lists
the items on the Edit menu and a brief description of the action each item
performs. You can use the basic Microsoft Windows keyboard shortcuts.
Connection Menu
8
From this menu you can connect to, disconnect from, or send a break to a
remote host computer. You also use this menu to set up or change Terminal
options (communications, modem, and font). The following table lists the
items on the Connection menu and describes the action each item
performs.
Menu Item Action
Copy Copies the selected text to the Microsoft Windows
clipboard.
Paste Pastes (sends) the contents of the Microsoft
Windows clipboard to the location of your cursor on
your PC as if you had typed it in.
Clear Clears the contents of the Microsoft Windows
clipboard.
Menu Item Action
Connect Establishes a connection to a remote host computer
as specified in the active connection profile. If a
connection is already active, this menu item is
disabled.
Disconnect Disconnects the active connection. If there is no
active connection, this menu item is disabled.