Lucent Technologies CentreVu Supervisor, Installation And Getting Started Manual

Page: 163 / 306

CentreVu Supervisor Version 8 Installation and Getting Started
Using CentreVu Supervisor Reports
Formatting Table Reports
7-25
General Tab
7
The General tab allows you to make format changes to a table.
The following table parameters can be changed:
●
Show Gridlines—specifies whether or not table lines are to be shown in
the table.
●
Fixed Region, Columns—specifies the number of columns from the left
of the table that are fixed in place and do not scroll. Valid values are in the
range of 0 through 99. You can use the spin boxes to select a valid value or
type in the value.
●
Fixed Region, Rows—specifies the number of rows from the top of the
table that are fixed in place and do not scroll. Valid values are in the range
of 0 through 99. You can use the spin boxes to select a valid value or type
in the value.
Spin Box