Lucent Technologies CentreVu Report Designer, User Manual

Page: 177 / 266

Format | Table CentreVu Report Designer Version 8 User Guide
General Tab
13-3
General Tab
13
The General tab allows you to make format changes to a table.
General Tab
Options
13
The following table parameters can be changed:
●
Show Gridlines — This specifies whether grid lines are to be
shown in the table.
●
Fixed Columns — This specifies the number of columns from the
left of the table that are fixed in place and do not scroll. Valid values
are in the range of 0 through 99. You can use the spin boxes can to
select a valid value or type the value in.
●
Fixed Rows —This specifies the number of rows from the top of the
table that are fixed in place and do not scroll. Valid values are in the
range of 0 through 99. You can use the spin boxes to select a valid
value or type the value in.
●
Orientation —Horizontal builds the table with the column names
across the top of the table, so that the table reads left to right.
Vertical builds the table with the column names down the left-hand
side of the table, so that the table reads top to bottom.