Lucent Technologies CentreVu Report Designer, User Manual

Page: 171 / 266

Format | Chart CentreVu Report Designer Version 8 User Guide
Type Tab
12-21
●
% Axis check box — causes the value axis (y-axis) to be displayed
as percentages rather than as actual data values. This can be
combined with the stacked check box to produce a percentage
stacked chart.
Using the Type
Tab
12
To use the Type tab, complete the following steps:
1. Select the 2D or 3D radio button, based on whether you would like
the report to display two-dimensionally or three-dimensionally.
2. Select the Chart Type.
The available types for two-dimensional charts are Bar, Line, Area,
Step, Horizontal Bar, and Pie.
The available types for three-dimensional charts are Bar, Line, Area,
Step, Clustered Bar, Horizontal Bar, and Pie.
3. For any type of report, other than Pie, you can select the Stacked
check box to display all series together rather than separately.
If you select the Stacked check box, you can also select the % Axis
check box, which causes the y-axis to be displayed as percentages
rather than as data values.
4. Select the Apply button to make the changes and to keep the Chart
Format Options window open.
Select the OK button to make the changes and to close the Chart
Format Options window.