Setup
Logons
CellPipe™ SDSU User’s Guide
2-5
To change a supervisor password:
1
From the Main Menu, select
Configure UserID and Password
.
2
Select
Change Supervisor Password
.
3
Enter a password of up to 17 alphanumeric characters.
To add new user:
1
From the Main Menu, select
Configure UserID and Password
.
2
Select
Change User ID
.
3
Enter a new user ID of up to 17 alphanumeric characters.
Network administrator logon
The permanently configured administrator login ID is
NetMan
(case sensitive).
There is no initial value for the administrator password. Press Enter and you will be
logged on as administrator.
To specify an administrator password:
1
Press Enter.
2
From the Main Menu, select
Configure UserID and Password
.
3
Select
Change NetMan Password
.
4
Enter a password of up to 17 alphanumeric characters.
User logon
There are no initial values for the user ID and password. Press Enter twice to log on as
a user.
To specify a user ID and password:
1
Press Enter twice to log on as a user.
2
From the Main Menu, select
Configure UserID and Password
.
3
Enter a user ID value of up to 17 alphanumeric characters.
4
Enter a password of up to 17 alphanumeric characters.
