CellPipe® 60A/60A-BX User Guide
15
Hardware installation
1.
Connect one end of the ADSL cable into the WAN port of the
ADSL modem, and the other end into the ADSL wall outlet.
2.
Connect one end of the RJ-45 cable into one of the RJ-45 ports
of the ADSL modem, and the other end into your PC or LAN.
3.
Plug in the AC adapter into the AC power socket, and connect
the DC jack into the PWR inlet of the modem.
4.
Use a 9-pin RS-232 cable to connect the Console cable to the
RJ-45 cable then to a PC with data terminal emulation software
(Hyper Terminal) installed, in order for local management.
5.
If you are using the optional Wireless Access Point (AP), gently
slide it into the slot.
Wireless AP
Power Socket
n
j
k
m
l
PC
Management
ADSL Wall Outlet
