manualshive.com logo in svg

Lucent Technologies CBX 3500, Configuration Manual

Share
Download
Lucent Technologies CBX 3500 Configuration Manual Download Page 546

Beta Draft Confidential

13-8

1/19/05

ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000

Configuring Layer 2 VPNs
Using the Layer 2 VPN/Customer View Feature

Using the Layer 2 VPN/Customer View Feature

The Layer 2 Customer/VPN View feature enables a network view for a specific 
customer, making it easy to identify those logical ports that belong to the customer. 
When you create PVCs with the Layer 2 VPN/Customer View feature enabled, the 
Select End Logical Ports dialog box only displays the logical ports that belong to the 
customer you selected. See 

“Using the Layer2 Customer/VPN View Feature” on 

page H-4

 for information on using this feature.

As you configure logical ports, use the instructions in 

“Configuring a Logical Port for 

Layer 2 VPN” on page 13-7

 to assign the port to a VPN or customer. 

Note  – To give a customer the ability to monitor network resources without the ability 
to provision, edit either the 

.cshrc

 or the

 .

profile

 file for an NMS user and add the 

following lines:

OVwRegDir=/opt/CascadeView/registration export OVwRegDir

These lines disable the Administer menu and all its provisioning functions; the NMS 
user only sees the Monitor menu functions.

Summary of Contents for CBX 3500

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands