manualshive.com logo in svg

Lucent Technologies CBX 3500, Configuration Manual

Share
Download
Lucent Technologies CBX 3500 Configuration Manual Download Page 280

Beta Draft Confidential

7-44

1/19/05

ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000

Configuring Trunks
Adding an External Device Object to the Network

Launching the Navis AQueView Client

Once a PSAX object has been added to the map, the Navis AQueView EMS client 
may be launched via that map object.

Right-click on the icon and select Launch AQView Client. AQueView must be 
installed on the same UNIX server or PC where the NavisEMS-CBGX client is 
installed or the AQueView installed path must be accessible to the NavisEMS-CBGX 
client. 

Adding NMS, Router, or Network Objects

To add an NMS, Router, or Network object to a network map:

1. Open a map on network.

2. From the Edit menu, select Create.

3. Select Equipment.

4. Select NMS, Router, or Network to add one of these objects to the map.

Figure 7-16.

Network Map View Dialog Box, Adding Equipment

Summary of Contents for CBX 3500

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands