Lucent Technologies CAJUN M770, User Manual

Page: 220 / 266

Chapter 17 Managing System Commands
202 Cajun M770 ATM Switch User’s Guide
Setting the linewrap
To set the linewrap, use the
terminal linewrap
command.
Viewing the prompt
To display the current system prompt, use the
terminal prompt
command.
Changing the prompt
To change the system prompt, use the
terminal prompt
command.
Note: The only value that should be changed is the prefix (e.g. M770). The sX
(X=current slot number) should not be written as a system prompt.
Command:
M15-155s8:/>terminal linewrap {none | pager | terminal}
Example:
M15-155s8:/>terminal linewrap pager
Parameter:
none
The line wrapping is carried out by the terminal.
The M770 ATM Switch will not try to calculate how
many lines have actually been used on the terminal.
In fact, it will assume that no wrapping has occurred
when performing pager functions.
pager
When the line output by the M770 ATM Switch
reaches the defined terminal length, the M770
ATM Switch will insert a line break and assume that
no line wrapping is carried out by the terminal.
terminal
The line wrapping is carried out by the terminal.
The M770 ATM Switch will keep a record of the
number of lines (using the terminal width).
Command:
M15-155s8:/>terminal prompt
Output:
prompt is “M15-155s8”
Example:
M15-155s8:/>terminal prompt Caj770
Output:
Caj770s8:/>