Lucent Technologies CAJUN M770, User Manual

Page: 219 / 266

Chapter 17 Managing System Commands
Cajun M770 ATM Switch User’s Guide 201
Viewing the terminal width
By default, the terminal width is set to 79.
To display the current terminal width, use the
terminal width
command.
Setting the terminal width
To set the terminal width, use the
terminal width
command.
Viewing the wordwrap status
To display the wordwrap status, use the terminal wordwrap command.
Setting the wordwrap
To set the wordwrap, use the wordwrap command.
Viewing the linewrap status
To display the linewrap status, use the
terminal linewrap
command.
Command:
M15-155s8:/>terminal width
Output:
terminal width 79 (auto-detected)
or
(user-configured)
Command:
M15-155s8:/>terminal width <columns>
Example:
M15-155s8:/>terminal width 90
Parameter:
<columns>
The number of columns to be displayed
on the terminal.
Command:
M15-155s8:/>terminal wordwrap
Output:
wordwrapping enabled
or
wordwrapping disabled
Command:
M15-155s8:/>terminal wordwrap [on | enable | off |
disable]
Example:
M15-155s8:/>terminal wordwrap enable
Command:
M15-155s8:/>terminal linewrap
Output:
no linewrapping