Beta Draft Confidential
B-4
7/12/04
B-STDX, CBX, and GX Network Management Station Installation Guide
Backing up to the Remote Backup Server
Subsequent Backups to the Remote Backup Server
Subsequent Backups to the Remote Backup Server
Use the following steps from the Sybase/HP/NavisCore workstation to backup the
Sybase 12.5.0.1 Server to the Remote Backup Server on a daily basis.
1.
Log in as the Sybase user by entering:
su - sybase
2.
Enter:
script /opt/sybase/backup/sybck.out
The script command saves output from the
dbcc checkdb
command (
step 4
) and
places it in the
sybck.out
file. In addition, the output goes to the screen.
3.
Initiate an isql session by entering:
isql -U sa -P <
SA password
> -S <
database server name
>
4.
To check the consistency of the database, enter:
1>
dbcc checkdb(master)
2>
go
1>
dbcc checkdb(cascview)
2>
go
1>
dbcc checkalloc(master)
2>
go
1>
dbcc checkalloc(cascview)
2>
go
1>
dbcc checkcatalog(master)
2>
go
1>
dbcc checkcatalog(cascview)
2>
go
1>
quit
Note –
The Technical Assistance Center strongly recommends that you back up the
Sybase “cascview” database daily.
Note –
If you have a three-system configuration (HP OpenView/NavisCore
installed on a workstation, Sybase installed on another workstation, and remote
backup server installed on a third workstation), log on to the HP
OpenView/NavisCore workstation.
Summary of Contents for B-STDX
Page 170: ......