Installation Instructions
1 |
P a g e
v 1 . 0
EDISON TABLE LAMP & BLUETOOTH SPEAKER
SKU# 281015
Rated Voltage 220-240V~ 50Hz
Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read and follow all
instructions carefully before assembly, installation and use of the product. Please keep instructions for future reference.
Warranty
•
This fitting is covered by a 12 month warranty from the date of purchase. Please retain proof of purchase.
•
Warranty will be void if there is any damage due to improper usage or modification to the fitting.
•
Failure to comply with the instructions in this manual may increase the risk of damage or injury and will void
warranty.
Installation requirements
•
Select a suitable location for this light fitting:
- Ensure it is on a flat and stable surface.
- This product is suitable for indoor use only.
- Do not place flammable material near or over the fitting.
- Ensure the fitting is not installed in direct line of an air vent/system.
•
Do not exceed the maximum wattage rating.
•
Take care not to pull any electrical wires during unpacking as this may damage the connection.
•
Lay out all the components on a smooth surface and make sure there are no components missing before
assembling. If parts are missing, return the complete product to the place of purchase for inspection or replacement.
•
Check whether the fitting has been damaged during transport. Do not operate/install any product which appears
damaged in any way. Return the complete product to the place of purchase for inspection, repair or replacement.
•
Do not plug into the mains power socket outlet before or during assembly. Only do so after the portable lamp is fully
assembled with the globe installed and is ready to use for the first time.
Installation directions
1. Remove all packaging material from the fitting.
2. Install a globe (A
– not included) into the lamp holder. Do not exceed the maximum wattage rating.
3. Insert the plug (B) into the mains power socket outlet and ensure it is fully plugged in.
4. Turn the lamp ON by touching the button (C). Touch the button (C) repeatedly to dim the fitting in the following
stages: ON
→
30% brightness
→
60% brightness
→
100% brightness
→
OFF.
5. This fitting has a built-in Bluetooth speaker (D), which can be paired with Bluetooth devices.
•
To connect, activate the Bluetooth function of your Bluetooth device.
Select the “Table Lamp” in the available
devices list.
•
Once “Connected” appears, that indicates your Bluetooth device has been paired with this fitting successfully.
•
You should now be able to hear the audio from your device through the speaker on this fitting.
NOTE: This fitting only can be paired with one Bluetooth device at a time. When pairing with another Bluetooth
device, you will need to disconnect the previously paired connection.
NOTE: NOT all the Bluetooth devices may be compatible to be paired with the fitting.
