Installation Instructions
1 |
P a g e
V 1 . 0 ( 0 6 / 2 0 2 1 )
DIMI NIGHT LIGHT
SKU# 259100
Rated Voltage 220-240V~ 50Hz
Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read and follow all
instructions carefully before assembly, installation and use of this luminaire. Please keep instructions for future reference.
Warranty
•
This luminaire is covered by a 12-month warranty. The warranty is from the date of purchase, not the date of
installation.
•
If the luminaire is not installed by a licensed electrician, it will void the warranty.
•
Please retain the proof of purchase and evidence of installation by a licensed electrician for any warranty enquiries.
•
Warranty will be void if there is any damage due to improper usage or modification to the luminaire.
•
Failure to comply with the instructions in this manual may increase the risk of damage or injury and will void the
warranty.
Installation requirements
•
Select a suitable location for installation:
−
This product is suitable for indoor use only.
−
Do not place flammable material near or cover the luminaire.
−
When using the luminaire in an area prone to moisture, ensure that the area is well ventilated, and an
appropriately rated exhaust fan is used if required. Damage or corrosion caused by moisture is not a product
fault, and therefore not covered under warranty.
−
This product is rated IP20, which is NOT suitable to be used near the shower or bath area.
•
Lay out all the components on a smooth surface and make sure no components are missing before assembling. If
parts are missing, return the complete product to the place of purchase for inspection or replacement.
•
Check whether the luminaire has been damaged during transport. Do not operate/install any product which appears
damaged in any way. Return the complete product to the place of purchase for inspection, repair or replacement.
Installation directions
Remove all packaging material from the product and be careful not to throw away accessories that may be hidden
within the packaging material.
1. Plug the luminaire onto the power socket outlet;
2. Switch ON/OFF the luminaire using the ON/OFF/AUTO switch.
3. Alternately, the luminaire can be switched to AUTO mode:
−
The light will be switch off when there is enough ambient light in the room;
−
The light will be switch on automatically when there is no ambient light.
