Installation Instructions
1 |
P a g e
v 1 . 0 ( 0 7 / 2 0 2 0 )
LUCCI CONNECT FLOOD LIGHT WITH CAMERA
SKU# 240915
Rated Voltage 220-240V~ 50Hz
Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read and follow all
instructions carefully before assembly, installation and use of this product. Please keep instructions for future reference.
Warranty
•
This luminaire is covered by a 3-year warranty. The warranty is from date of purchase, not the date of installation.
•
If the luminaire is not assembled and installed by a licensed electrician, the warranty will be void.
•
Please retain the proof of purchase and evidence of installation by a licensed electrician.
•
Warranty will be void if there is any damage due to improper usage or modification to the luminaire.
•
Failure to comply with the instructions in this manual may increase the risk of damage or injury and will void the
warranty.
Installation requirements
•
Must be assembled and installed by a licensed electrician.
•
All wiring and installation of the luminaire must adhere to the latest local and national wiring rules.
Eg. AS/NZS 3000 Electrical installations.
•
This luminaire is not suitable for use with dimmer switches and should not be used on a circuit which has a dimmer.
•
Select a suitable location for installation:
- This luminaire is protected against water penetration to IP44 standards, which is splashing from every direction.
This must be maintained during installation.
- It is suitable for indoor or outdoor use.
- The mounting point must support 2 times the weight of the luminaire.
•
Take care not to pull any electrical wires during unpacking as this may damage the connection.
•
Lay out all the components on a smooth surface and make sure no components are missing before assembling. If
parts are missing, return the complete product to the place of purchase for inspection or replacement.
•
Check whether the luminaire has been damaged during transport. Do not operate/install any product which appears
damaged in any way. Return the complete product to the place of purchase for inspection, repair or replacement.
Installation directions
Remove all packaging material from the product and be careful not to throw away accessories that may be hidden within
the packaging material.
Installation of the micro SD card (Figure A)
1. Press the camera module until it rotates about 70°.
2. Remove the cover of the SD card slot using the screwdriver provided.
NOTE: The screw is an anti-theft screw, which must be unscrewed by the screwdriver provided.
3. Uncover the plastic plug.
4. Install the SD card onto the slot.
5. Install the plastic plug and the cover back to the camera module. Rotate the camera module back to its original
position.
Installation of the luminaire (Figure.B)
1. Switch off the power before commencing the installation.
2. Loosening the screw on the bottom part using the screwdriver provided.
NOTE: The screw is an anti-theft screw, which must be unscrewed by the screwdriver provided.
