Installation Instructions
1 |
P a g e v 1 . 0 ( 0 3 / 2 0 2 1 )
LUCCI CONNECT FESTOON LIGHT
SKU# 220992, 220993
Rated Voltage 12V DC
NOTE: This luminaire can be DIY and does not require any electrical connection or disconnection.
When working with 240V, a licensed electrician is required.
Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read and follow all
instructions carefully before assembly, installation and use of this luminaire. Please keep instructions for future reference.
Warranty
•
This luminaire is covered by a 3-year warranty valid for in-store replacement or refund only.
•
The warranty period starts from the date of purchase. Please retain the proof of purchase for any warranty enquiries.
•
This luminaire is not suitable for use with dimmer switches. The warranty will be void if the luminaire is used on the
same circuit, which has a dimmer switch.
•
Warranty will be void if there is any damage due to improper usage or modification to the luminaire.
•
Failure to comply with the instructions in this manual may increase the risk of damage or injury and will void the
warranty.
Installation Requirements
•
This luminaire is designed to be used with a mains power socket-outlet (not included).
The installation location must have an existing mains power socket-outlet (not included) pre-installed.
If you don’t have an existing mains power socket outlet (not included), please contact your licensed electrician.
•
All wiring and installation of the luminaire must adhere to the latest local and national wiring rules.
E.g. AS/NZS 3000 Electrical installations. If unsure, please contact a licensed electrician.
•
Select a suitable location for installation:
The mounting point must support 2 times the weight of the luminaire.
This luminaire is protected against water penetration to IP65 standards, which is against low-pressure jets of
water from all practicable directions.
NOTE: The plug-in power supply & the control unit is rated IP20 and has no protection against water
penetration. Must be installed in a dry location.
•
Only use the supplied plug-in power supply with this luminaire.
•
The luminaire must not be used if the protective shield has cracked. Replace any cracked protective shield before
using the luminaire.
•
Take care not to pull any electrical wires during unpacking as this may damage the connection.
•
Lay out all the components on a smooth surface and make sure no components are missing before assembling. If
parts are missing, return the complete product to the place of purchase for inspection or replacement.
•
Check whether the luminaire has been damaged during transport. Do not operate/install any product which appears
damaged in any way. Return the complete product to the place of purchase for inspection, repair or replacement.
•
Do not plug into the mains power socket-outlet before or during assembly. Only do so after the luminaire is fully
assembled and is ready to use for the first time.
