Futura ECO Installation Instructions
6 |
P a g e
BLADE INSTALLATION
NOTE: The hole in the foam packaging is designed to assist in holding the pre-assembled fan
into position. Insert the canopy cover end into the hole of the foam packaging to sit the motor
facing up during assembly.
Remove the screws from the light plate and remove the light plate. Fig. 4
Before installing the blades, remove the blades screws that are pre-installed.
Insert the blades through the side slot of motor and align with the 3 holes.
Secure the blades with the 3 blade screws, and ensure that the screws are tightened evenly. Do not
over tighten the screws as this can damage the blades. Repeat this process for all blades. Fig.5
Replace the light plate and tighten the screws.
Fig. 4
Fig. 5
Fig. 6
