P A D - C L I M A T E - S Y S T E M
Assembly instruction and operators manual
Introduction
4
1.
Introduction
Brief description of LUBING Pad-Climate-Systems
1.1.
The LUBING Pad-Climate-System is a cooling- and humidification system for agricul-
tural buildings for animal husbandry and for industrial complexes.
The system consists essentially of a pump which pumps water into a spray tube.
Through holes, water sprays against a Deflector. This distributes the water surface
covering over the Pads. The water goes on the one hand a part through the Pads
and the other part evaporated. The surplus water is caught in the Watergutter and
discharged partially and given on the other hand again to the pump.
Preface to the manual
1.2.
This manual facilitates is becoming acquainted with of the Pad-Climate-System and it
points out the intended use of the System. The manual contains important notes, as
the System is to be operated surely, properly and economically. Their attention helps
to avoid dangers to decrease repair costs and down-times and to increase the relia-
bility and the life span of the System. The manual is to be supplemented around in-
structions due to existing national regulations for accident prevention and to envi-
ronmental protection. The manual must be constantly at the place of work of the plant
available.
The manual is to be read and used from each person to, those assigned with work
with/on the System e.g.
•
operation, including preparation, disturbance recovery in the work routine, re-
moval
•
of scraps, care, disposal of operating and auxiliary materials
•
maintenance (maintenance, inspection, repair) and/or
•
transport.
Beside the manual and in the user country and in the employment place valid obliga-
tory regulations for accident prevention are to be considered also the recognized
specialized technical rules for security and professional working.
