Network Video Recorder User Manual
24
3. Set parameters as your desire.
4. Drag the text frames on the preview window to adjust the OSD position.
5. Click
Apply
.
5.3.3 Smart Event
Motion Detection
Motion detection enables the video recorder to detect the moving objects in the monitored area
and trigger alarms.
Steps
1. Go to
Configuration
→
Camera
→
Event
→
Motion Detection
.
Figure 5-9 Motion Detection
2. Select a camera.
3. Turn on
Enable
.
4. Set the motion detection area.
–
Click
Draw Area
or
Clear
to draw or clear areas. The first area is set as full screen by default.
–
Click
Full Screen
to set the motion detection area as full screen. You can drag on the preview
window to draw motion detection areas.
5. Adjust
Sensitivity
. Sensitivity allows you to calibrate how easily movement could trigger the
alarm. A higher value results in the more readily to triggers motion detection.
6. Optional: Set
Target Detection
as
Human
or
Vehicle
to discard alarms which are not triggered
by human body or vehicle. Only certain camera models support this function.
7. Set the arming schedule. Refer to
8. Set the linkage actions. Refer to
Configure Alarm Linkage Action
9. Click
Apply
.