User Manual of Network Camera
99
Transparent Channel: Connect a serial device directly to the camera. The serial
device will be controlled remotely by the computer through the network.
Steps:
1.
Enter RS-232 Port Setting interface:
Configuration> Advanced Configuration> System > RS232
Figure 10-15
RS-232 Settings
Note:
If you want to connect the camera by the RS-232 port, the parameters of the
RS-232 should be exactly the same with the parameters you configured here.
2.
Click
Save
to save the settings.
10.8
RS-485 Settings
Purpose:
The RS-485 serial port is used to control the PTZ of the camera. The configuring of
the PTZ parameters should be done before you control the PTZ unit.
Steps:
1.
Enter RS-485 Port Setting interface:
Configuration> Advanced Configuration> System > RS485
Figure 10-16
RS-485 Settings