![background image](http://html1.mh-extra.com/html/lts/cmip7442w-28m/cmip7442w-28m_user-manual_1945237076.webp)
User Manual of Network Camera
76
also set a name for the alarm output (optional).
3.
The
Delay
time can be set to
5sec,
10sec,
30sec,
1min,
2min,
5min, 10min
or
Manual
.
The delay time refers to the time duration that the alarm output remains in
effect after alarm occurs.
4.
Click
Edit
to enter the
Edit Schedule Time
interface. The time schedule
configuration is the same as the settings of the arming schedule for motion detection
Refer to
Task 2
Set the Arming Schedule for Motion Detection
in
Section 6.6.1.
5.
You can copy the settings to other alarm outputs.
6.
Click
Save
to save the settings.
Figure 6-48
Alarm Output Settings
6.6.5
Handling Exception
The exception type can be HDD full, HDD error, network disconnected, IP address
conflicted and illegal login to the cameras.
Steps:
1.
Enter the Exception Settings interface:
Configuration > Advanced Configuration> Events > Exception
2.
Check the checkbox to set the actions taken for the Exception alarm. Refer to