![background image](http://html1.mh-extra.com/html/lts/cmip7442w-28m/cmip7442w-28m_user-manual_1945237075.webp)
User Manual of Network Camera
75
(Normally Open) and NC (Normally Closed). Edit the name to set a name for the
alarm input (optional).
Figure 6-47
Alarm Input Settings
3.
Click
Edit
to set the arming schedule for the alarm input. Refer to
Task 2
Set the
Arming Schedule for Motion Detection
in
Section 6.6.1.
4.
Check the checkbox to select the linkage method taken for the alarm input. Refer
to
Task 3
Set the Alarm Actions for Motion Detection
in
Section 6.6.1.
5.
You can also choose the PTZ linking for the alarm input if your camera is installed
with a pan/tilt unit. Check the relative checkbox and select the No. to enable
Preset Calling, Patrol Calling or Pattern Calling.
6.
You can copy your settings to other alarm inputs.
7.
Click
Save
to save the settings.
6.6.4
Configuring Alarm Output
Steps:
1.
Enter the Alarm Output Settings interface:
Configuration>Advanced Configuration> Events > Alarm Output
2.
Select one alarm output channel in the
Alarm Output
drop-down list. You can