![background image](http://html1.mh-extra.com/html/lts/cmip7442w-28m/cmip7442w-28m_user-manual_1945237049.webp)
User Manual of Network Camera
49
Figure 6-19
Configure UPnP Settings
6.3.10
Email Sending Triggered by Alarm
Purpose:
The system can be configured to send an Email notification to all designated
receivers if an alarm event is detected, e.g., motion detection event, video loss,
video tampering, etc.
Before you start:
Please configure the DNS Server settings under
Basic Configuration >
Network >
TCP/IP
or
Advanced Configuration >
Network > TCP/IP
before using the Email
function.
Steps:
1.
Enter the
TCP/IP Settings
(
Configuration > Basic Configuration >
Network >
TCP/IP
or
Configuration > Advanced Configuration >
Network > TCP/IP)
to set
the IPv4 Address, IPv4 Subnet Mask, IPv4 Default Gateway and the Preferred
DNS Server.
Note:
Please refer to
Section 6.3.1
Configuring TCP/IP Settings
for detailed
information.
2.
Enter the Email Settings interface:
Configuration > Advanced Configuration > Network > Email