Quick Operation Guide of 0700/8800/8700 Series NVR
12
Rear Panel
0700/0700-R
8800
No.
Item
Description
1
VIDEO OUT
BNC connector for video output.
2
CVBS
AUDIO
OUT
BNC connector for audio output. This connector is synchronized with CVBS
video output.
VGA AUDIO OUT
BNC connector for audio output. This connector is synchronized with VGA
video output.
3
LINE IN
BNC connector for audio input.
4
RS-232 Interface
Connector for RS-232 devices.
5
VGA
DB9 connector for VGA output. Display local video output and menu.
6
HDMI
HDMI video output connector.
7
eSATA (Optional)
Connects external SATA HDD, CD/DVD-RM.
8
LAN Interface
1 network interface provided for 8800 and 2 network interfaces for 0700
9
Termination
Switch
RS-485 termination switch.
Up position is not terminated.
Down position is terminated with 120Ω resistance.
10
RS-485 Interface
Connector for RS-485 devices. T+ and T- pins connect to R+ and R- pins of
PTZ receiver respectively.
Controller Port
D+, D- pin connects to Ta, Tb pin of controller. For cascading devices, the first
NVR’s D+, D- pin should be connected with the D+, D- pin of the next NVR.
ALARM IN
Connector for alarm input.
ALARM OUT
Connector for alarm output.
11
GROUND
Ground(needs to be connected when NVR starts up).
12
AC 100V ~ 240V
AC 100V ~ 240V power supply.
13
POWER
Switch for turning on/off the device.
14
USB interface
Universal Serial Bus (USB) ports for additional devices such as USB mouse
and USB Hard Disk Drive (HDD).
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]
