LTS Security POE-SW1602N, Quick Start Manual, Page: 9 / 15

16/24-Port 100M Long-Range PoE Switch Quick Start Guide
4

When connected to both the network cable and op ti cal fi ber at the same ti me, the port works
as a fi ber op ti cal interface.
1.3.2 Rear Panel
Rear panel of POE-SW1602N and POE-SW2402N is shown as below.
Rear Panel of POE-SW1602N and POE-SW2402N
Figure 1-3 POE-SW1602N and POE-SW2402N Rear Panel
Grounding Terminal
The grounding terminal connects with ground cable in case of lightning. For details about
grounding, see sec
ti on
Grounding
.
Power Interface
Connect power interface of the switch with power socket by power cord, and use 220 VAC to
provide power to the switch.
Please use the original power cord to power up the switch.