Network Video Recorder User Manual
72
Chapter 7 Storage
7.1 Storage Device Management
7.1.1 Install the HDD
Before starting the device, install and connect an HDD to the device. Refer to the Quick Start Guide
for the installation instructions.
7.1.2 Add the Network Disks
You can add the allocated NAS or IP SAN disk to the device, and use it as a network HDD. Up to 8
network disks can be added.
Adding a NAS
Step 1
Go to
Storage
>
Storage Device
.
Step 2
Click
Add
to enter the Custom Add interface.
Step 3
Select NetHDD from the drop-down list.
Step 4
Set the type to NAS.
Step 5
Enter the NetHDD IP address in the text field.
Step 6
Click
Search
to search the available NAS disks.