LTS Security LTN8616D-P16 User Manual Download Page 187

Page: 187 / 203

Network Video Recorder User Manual

186

18.8 Restore Default Settings

Step 1

Go to

Maintenance

Default

Figure 18-10

Restore Defaults

Step 2

Select the restore type from the following three options.

Restore Defaults

: Restore all parameters, except the network (including IP address, subnet

mask, gateway, MTU, NIC working mode, default route, server port, etc.) and user account
parameters, to the factory default settings.

Factory Defaults

: Restore all parameters to the factory default settings.

Restore to Inactive

: Restore the device to inactive status.

The device will reboot automatically after restoring to the default settings.

Summary of Contents for LTN8616D-P16












































































































































































































Search results

Summary of Contents for LTN8616D-P16

Reviews:

Related manuals for LTN8616D-P16

Brands by name

Popular brands

LTS Security LTN8616D-P16, User Manual

Search results

Summary of Contents for LTN8616D-P16

Reviews:

Related manuals for LTN8616D-P16

Brands by name

Popular brands