LTS Security LTD3216C-PL User Manual Download Page 89

Page: 89 / 353

Local Configurations

Figure 5-46

Step 3 Adjust the position of channels if needed.

In the channel list, for example, in the channel 9 list, you can select 10, and then the
channel 9 and channel 10 exchange positions.

Step 4 Click

Apply

to complete the settings.

The live view screen displays the same layout as configured in this section.

5.2.6.3 Configuring Zero-Channel Settings

You can view several video sources on one channel on the web end.

Step 1 Select

Main Menu > DISPLAY > ZERO-CHANNEL

The

ZERO-CHANNEL

interface is displayed. See Figure 5-47.

Summary of Contents for LTD3216C-PL


































































































































































































































































































































































Search results

Summary of Contents for LTD3216C-PL

Reviews:

LTS Security LTD3216C-PL, User Manual, Page: 89 / 353

Search results

Summary of Contents for LTD3216C-PL

Reviews: