12
3)
【
POW
】
button is for the current information of power reduction.
4)
【
TEM
】
Current temperature of lamp board.
6.12
LIGHTING SETTING PARAMETER RESET
1) Press the
【
ENTER
】
button in
【
ST L
】
menu, then enter to the lighting setting parameter reset.
2) Press the
【
UP/DOWN
】
button to select
【
YES
】
.
3) Press the
【
ENTER
】
button to escape and save.
Illustrations
：
“ADDR” “CTST” and “PROG” are not reset, the others reset to the underlined value of the
word.
6.13
【
PROG
】
SELF-PROGRAMMING PARAMETER RESET
1) Press the
【
ENTER
】
button in
【
PR L
】
menu, then enter to the
【
PROG
】
self-programming parameter reset.
2) Press the
【
UP/DOWN
】
button to select
【
YES
】
.
3) Press the
【
ENTER
】
button to escape and save.
6.14
LIGHTING PARAMETER DOWNLOADING EACH OTHER VIA DMX
CABLE
1) Press the
【
ENTER
】
button in
【
SEND
】
menu, then enter to sending parameter to other lightings.
2) Press the
【
UP/DOWN
】
button to select
【
YES
】
.
3) Press the
【
ENTER
】
button to confirm sending.
Illustrations
：
1)Please disconnect the connection of projector and DMX console before sending the parameter.
2)The information of
【
ADDR
】
can’t be sent, can’t be downloaded each other.
3)There will be an automatic reset of the other projectors after receiving parameter correctly.
7.
Operating Control Instruction
Master/Slave
Summary of Contents for 18442
Page 1: ...18442 COB100 RGBW 4 in 1 USER MANUAL...
Page 2: ......
