Ltech LT-DMX-3001, Manual

Page: 1 / 2

1
LT-DMX-3001
DMX-SPI Signal Decoder Manual
LT- DMX-3001
1. Product parameter
Input voltage
Input Signal
Output signal
Decoding Channels
Output Grey Scale
DMX512 Connector
Product Dimension
Package Size
Working temperature
Weight (G.W)
DC12V~DC24V
DMX512/1990
SPI(compatible with TLS3001, TLS3002, driving IC)
512 DMX CH/unit
256 levels/CH(8bit/CH)
Standard XLR-3 Connector
L125×W52×H40mm
L135×W70×H50mm
-30 ~65
℃ ℃
300g
LT-DMX-3001 DMX decoder works to convert universal DMX512 signal to SPI(TTL)
signal. It can control LED lights based on Tm1803, TM1804, Tm3001, TM1812 via DMX
console.
Tm1803, TM1804, TM3001 and TM1812 are the IC with grey scale processor. It can
support 256 scale levels and only need one signal cable, which convenient for design and
installation for the LED lights. These 4 chips are widely used in LED digital lights among
LED dot light, SMD strip, LED Fence tubes, LED wall light, LED pixel screen, LED Hi-
Power spotlight , flood light, etc.
The kernel of our LED controller adopt MCU from ATMEL to ensure the LT-DMX-3001 DMX
decoder runs steady.
RoHS
COMPLIANT
warranty
3 years
ISO9001:2008
ZHUHAI LTECH ELECTRONIC TECHNOLOGY CO., LTD. WWW.LTECHONLINE.COM LT@LTECHONLINE.COM Tel: +86 756 620 8823 Fax: +86 756 620 8833
LT- DMX-3001 DMX512 Decoder Manual LT- DMX-3001 DMX512 Decoder Manual
LTECH LTECH
2
The Port of connecting
Power supply & LED light
2. Configuration Diagram
1 2 3 4 5 6 7 8 9 10
ON DIP
DMX signal input port
D
A
T
A
D
C
+
MODEL: LT-DMX-1
DMX512 DECODER
DC5V-DC24V
512 CHANNEL
G
N
D
3. Output Port definition
No. Silk screen Function
1
2
3
4
5
6
Power supply
input port
Output port
Connect LED
LED power supply input anode
LED power supply input cathode
Data cable
Ground wire (power supply cathode), 2 GND ports,
Only connecting 1 GND is OK.
DC+
DC-
DATA
GND
DC+
GND
Attention: The power supply DC+ cannot connect to data cable. Otherwise it will
damage the decoder and the LED’s driving IC.
4. How to set DMX address via dip switch
Figure 1
1 2 3 4 5 6 7 8 9 10
ON
0
1
OFF
ON
1, Set DMX512 original address
1
2 3
5
6 7 8
10
4
001 002 004 008 016 032 064 128 256
1.This decoder adopts Dip switch to set the address. The Dip switches from 1 to 9 are a kind of binary
value coding switches which used for setting DMX512 initial address code, The 1st is the lowest one, The
9th is the highest one. Can set 511 addresses totally.
2.DMX512 initial address is the total amount of the Dip switch 1-9, down dip switch to “ON” position, User
can get its place value, Up dip switch to “OFF” position, Its place value is 0.
Instructions
DIP
Address
LED power supply output anode
G
N
D
M1804, TM3001 and TM1812IC can choose high or low speed when used in LED
design circuit. TM1803 only can choose low speed. Designed in low speed will get
high PWM frequency and designed in high speed can control more LED lights. The
high or low speed choosing of the decoder needs to match the light’s design gears.
Otherwise the LED light can not work. The general LED lights are designed in low-
speed mainly.
high/
low speed
9
The Decoder enter into DMX control mode automatically., when receiving DMX signal.
Like figure 1: Fun=off is high speed(upward), FUN=ON is low speed (downward)
4
1 2 3 4 5 6 7 8 9 10
ON
0
1
OFF
ON
Figure 2