ArtNet-SPI-1
ArtNet-SPI Converter
1
1. Technical specs
3. Product dimension:
2
2. Performance features
warranty
5 years
7
3
120
4
5
ArtNet-SPI-1 ArtNet-SPI Converter
ArtNet-SPI-1 ArtNet-SPI Converter
ArtNet-SPI converter is the Ethernet Control System based on the ArtNet protocol, used to convert the ArtNet
network data package into SPI(TTL) digital signal, adopting high-speed processor, stable and reliable working.
Following ArtNet standard protocol, it supports RJ45 network interface and green terminal output interface.
It is compatible with all the effects lighting control software which support ArtNet protocol, widely used in the
LED dot matrix and the stage lighting.
ArtNet-SPI-1 can control LED lighting with compatible driving IC, such as TM1804/1809, D705, LPD6803/1101,
UCS1903/1909/1912/2903/2909/2912/6909/6912, WS2811/2812/2801/2803, P9813, etc.
SPI(TTL) digital signal
12Vdc (with a power adaptor)
L120×W73×H45mm
L198×W78×H50mm
360g
-30
~65
°C
°C
Working temp.:
ArtNet
ArtNet-SPI-1
Output signal:
Power input:
Dimension:
Package size:
Weight (G.W):
Input signal:
RJ45
Network connection:
Indoor use only
IP:
Total isolation
Isolation Ethernet port:
Total isolation
Isolation power input:
30mA@12Vdc
Current:
2.1 Based on ArtNet protocol network data communication, accept network DMX data, output one set SPI data.
2.2 IP address is bound to SubNet, no need to reset, plug and play.
2.3 Manage ArtNet on broadcast mode or unicast mode.
2.4 Compatible with the light software based on ArtNet protocol, control LED lighting.
2.5 Connect up to 256 DMX universes to one network.
2.6 10/100Mb/s Ethernet port.
2.7 Firmware can be updated via the network.
