LT Piccolo 12, User Manual

Page: 33 / 86

Piccolo

33 from 82
www.lt-light.com
[#] [S#] Start the loaded effect in S# , this effect is executed # times, and then, the effect is
stopped automatically. The number of times is a number from 1 up to 99.
[5.B]
STEP
(hold down) [S#] Starts the next step in manual mode. Step to step mode.
To modify onlt the options or attributes of a concrete effect, press:
[ EFFECT ] [ # ] [ OPTIONS ] and edit text, attributes, etc
To exit of these options lines, press [OPTIONS], [EXIT] or the loading command [LOAD] [S#].
To modify the contents of an effect, open the table of this effect pressing:
[EFFECT][#][MDFY]
To modify the general options of several effects only (attributes, times…) it is possible to open the
effect list with:
[EFFECT] [MDFY]
If a additional control of level/rate for a chase or of rate/level for a effect is needed, program this
additional control pressing
[MD.FY] [FL.MT] , and programming to a Submaster the option
10:RATE
or
11:LEVEL
. This special control must have the Submaster range programmed (or
only one Submaster) that will be controlled; the Crossfader X can be included too.
21. CONTROL SUBMASTERS FOR LEVEL AND RATE
It’s possible to create a general control for rate ( 9: RATE
) and/or for level (
19: LEVEL
)
using any Submaster of the console. For this, open the screen:
[MD.FY][FL.MT]
Select the desired option and configure the playbacks that will be controlled for this control, the
crossfader (
X
) and the Submaster range (
01-12
)