Zhengzhou Linghang Robot Co.,Ltd
15
Tool plate
Master Plate
Module mounting screws
LMO-S12AM
LMO-S12AT
5
、
Remove the fasteners that fix the tool plate to the tool adapter flange or
customer tool;
；
6
、
Remove the tool plate
；
3.7Optional modules installation
Optional modules are usually installed on the tool changer by the LT company
before shipment. The following steps described the field installation or removal as
required. The tool changer can select many different types of modules. Some
modules will require an adapter plate to be installed on the tool changer.
（
Take
LMO-S12Afor example
）
Tools Requirement
：
2mm Allen wrench
；
Required items: cleaning cloth, LOCTITE 242 thread anaerobic adhesive.
1.Keep tools in a safe place
；
2.Release master plate and tool plate
；
3.Close and completely disconnect all energy connections; For example:
electrical, air, etc.
；
4.Clean the mounting surface
；
5.Align the optional module with the mounting surface of the master plate or
tool plate
；
Modules
Locating pin
