Zhengzhou Linghang Robot Co.,Ltd
9
2.3 Optional modules
This model has 1 module mounting interface
，
can install electrical module
，
more modules please find from website:
https://www.ltautotools.com/ltc-19.html
3. Installation
The end effector is usually connected to the tool plate through the tool
adapter flange. We can provide standard and customized tool adapter flanges as
required. All fasteners used to install the tool changer on the robot and tools shall
be tightened to the torque value as indicated. In addition, removable (blue) Loctite
242 anaerobic adhesive shall be used for fasteners.The pneumatic pipeline and
cable are fixed and tied together, and must be able to move freely during
operation.
Warning: before maintaining or repairing the tool changer, be
sure to place the tool on the tool support or stop, turn off all
electrical, air, water, etc., and the power supply has been
discharged from the circuit according to the customer's specific safety operation
procedures and policies. And confirm that the air pressure and liquid pressure have
been released.
Passport M5
interface
Aluminum
Locating pin hole
Steel ball snap ring
