Figure 4. 4
PTZ Panel - General
4.
Click to enter the preset No. in the corresponding text field.
5.
Click the
Call Preset
button to call it.
4.2.3
Customizing Patrols
Purpose:
Patrols can be set to move the PTZ to different key points and have it stay there for a set duration before moving
on to the next key point. The key points are corresponding to the presets. The presets can be set following the steps
above in
Customizing Presets
.
Steps:
1.
Enter the PTZ Control interface.
Menu>Camera>PTZ
Figure 4. 5
PTZ Settings
2.
Select patrol No. in the drop-down list of patrol.
3.
Click the
Set
button to add key points for the patrol.
Figure 4. 6
Key point Configuration
4.
Configure key point parameters, such as the key point No., duration of staying for one key point and speed of
patrol. The key point is corresponding to the preset. The
Key Point No.
determines the order at which the
PTZ will follow while cycling through the patrol. The
Duration
refers to the time span to stay at the
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]
